integrative pressurized solar water heater(heat pipe)

1.Outer tank diameter: 460mm(58X1.8m),480mm(58X2.0m)

2.Outer tank material and thickness: PVDFplate(0.35mm)/ colorful steel plate(0.40mm)
3.Inner tank diameter: 360mm (58X1.8m), and 360mm (58x2.0m)

4.Inner tank material and thickness: stainless steel 304-2B, 0.6mm

5.Support stand: galvanized steel & allumiunum alloy (PATENTED)/1.5mm

6.Insulation: 55/60mm high dense integral polyurethane foam

7.Capacity (L): tube x 10 L

8.Interval: 9.5/8cm
9.Working Pressure: 0.6MPa (6 Bar)

10.Heat preservation: 72h -80h

11. Diameter of cooper coil: 12mm

12. Thickness of copper coil: 1mm

13. Length of cooper coil: 35m

14. Vacuum tube: SS-C/CU selective coating

15. No. of vacuum tubes: 15---36

16. Daily efficiency: >56% (sunny days), >40(winter)

17. Antifreeze: > -35 centidegrees

18. With an assitant tank to feed water automatically when water in tank is below preset level

19. For both flat roof and slope roof

1) Works under the pressure of pipe water

2) There is no need to wait and hot water is available immediately

3) Completely automatic operation

4) Drinking water quality to promote life quality (from pipe water)

5) Temperature preservation can last for 80 hours

6) Without volatile tubes

7) Without incrusting, long usage life

8).Hailstone resistance: 25mm