split solar water heater(heat pipe)

Feature:

1.Can be installed in flat roof and slope roof.

2.Cab be used for solar heating proect.

3.Heat pipe is in vacuum tube.

4.It can works in 2 minutes. (Starting speed: 2 min )There is no need to wait and hot water is available immediately.

5.Heat pipe is heated in 3 seconds.

6.Water tank is seperated from solar collector.

7.Water tank can be put in any place of house.

8.Hot water can be used to drink, bath and wash.

9.Lifespan: > 15 years.

10.Temperature preservation can last for 80 hours.

11.Completely automatic operation under control of working station

12.Without volatile tubes

13. With increased anode magnesium bar stick to prevent furring.

14.Pipeline is made of all red copper and conducted by heat transfer medium liquid.

15.Tank is equipped with electric water heater setting, automatic temperature controller.

16.With increased anode magnesium bar stick to prevent furring.

17. Water does not  flow in the vaccum tubes and is operated when confined.

Specification:

1.Header pipe: 1.0 mm

2.Manifold thickness:1.0mm

3.Frame material and thickness: aluminium alloy/2.75mm

4.Insulation:polyurethane foam & alluminum silicate

5.Water temperature:40-90 degrees

6.Rated water pressure: 0.8MPA

7.Electric heater: 1.5KW OR 2.5KW

8.Accessory: P/T valve, Air vent

9.Vacuum tube: SS-C/CU selective coating